Ring Type Joint Gasket (RTJ Gasket)

Ring type joint gasket (RTJ Gasket) is a high integrity sealing gasket, high temperature and high pressure gasket for applications in petroleum industry, oilfield drilling, pressure vessels joints, pipes and valves etc from Goodrich Gasket Pvt. Ltd.

Goodrich Gasket manufactures ring joint gaskets (RTJ Gasket) according to API 6A and ASME B16.20 for numerous industrial applications based on the customer required specifications with corrosive protection using electroplated zinc or alternate material coating of up to 0.0003” thickness.

As a result of metal to metal sealing media they are made to be free of indentations, tool marks etc and have a surface finish of maximum,

• R, RX – 63 microinches Ra (1.6 micrometer Ra).
• BX – 32 microinches Ra (0.8 micrometer Ra).

The working of ring joint gaskets (RTJ Gasket) can be explained by the axial compressive load causing them to deform and flow to irregularities in the flange grooves that it seals. As load bearing area of ring joint gaskets (RTJ Gasket) are small high surface stresses are produced between the sealing face and the groove, making it poor in recovery characteristics and unfit for reuse.

Goodrich Gasket manufactures Type R, RX, BX ring joint gaskets (RTJ Gasket) in API 6A, ASME B16.20 gasket standards for API 6B, ASME B16.5 and API 6BX flanges respectively.

Types R, RX operates in 6250 psi/ 5000 psi with oval or octagonal gasket orientation and interchangeability.

TYPE R OVAL

TYPE R OVAL

TYPE R OVAL

Type BX operates in 20,000 psi with non interchangeability. Type BX has a pressure passage hole for pressure equalization on each sealing face sides.

TYPE BX

Derived from RX, BX are SRX, SBX in accordance with API 17D standards for usage in applications like subsea well heads etc.

TYPE SBX

Ring joint gaskets (RTJ Gasket) are designed to be softer than flange grooves so as on compression the gasket plastically deforms and not the grooves.

Thus Goodrich Gasket supplies ring joint gaskets (RTJ Gasket) with the hardness numbers as follows:

In order to reduce turbulent flow in adjoining flanges and prevent gasket/flange erosion Goodrich Gasket offers SPECIAL R, RX type joints with PTFE inserts. Goodrich Gasket also offers Nitrile Rubber coated ring joint gaskets (RTJ Gasket) used in pressure testing applications and as a protection for flange grooves and surfaces. Ring joint flanges with different ring groove diameters are sealed by Transition Ring joints, a different size and same PCD combination rings. Blind Ring joints, a standard ring joint with integral solid metallic centers blanks off flanges and pipe work. Flange Guards of closed cell neoprene foam readily compress under load protecting outside diameter of Ring joints in corrosive environments.

For detailed information regarding the API Ring Joint Gasket (RTJ Gasket) Materials, Ring Joint Gasket (RTJ Gasket) Specifications visit www.apiringjointgasket.com