A gasket with a metallic outer shell and either a
metallic or non-metallic compressed fiber filler is
Metal Jacketed Gasket where the filler material offers
resilience and metal jacket protects the filler and
resists pressure, temperature and corrosion.
Metal jacketed gaskets manufactured at Goodrich Gasket
are used as heat exchanger gaskets and also in pumps,
valves etc despite of their limited recovery and
resilience property. Gasket sealing is effective under
high bolt loads, smooth flange surface finish and flange
flatness.
The gasket materials used for its construction are:
Metallic category includes Soft iron, Carbon Steel,
Stainless Steel, Inconel, Monel, Nickel, Aluminum,
Brass, Copper etc. Non-Metallic category includes
compressed fiber millboard, PTFE, Tanged insert
graphite, Ceramic etc.
The types of metal jacketed gaskets Goodrich Gasket
offers are:
Single Jacketed Gaskets, Filler material enclosed in a
metal jacket, covering the inside & outside diameter
of gasket
| Type |
Construction |
Use |
Suitability |
| Type 120 |
One contact surface covered |
Narrow flange widths in circular &
non-circular configurations |
|
| Type 124 |
Overlapped single jacketed type with filler
enclosed on inside & outside diameter & on
contact surfaces |
Boiler, pumps, compressors, diesel &
gasoline engines |
High temperature gasket usage & narrow
gasket width [6.4mm (min)] & nominal
thickness 3.2mm |
Double Jacketed Gaskets, Filler material enclosed by a
two piece metal jacket covering both inside &
outside diameters & both contact surfaces. Gasket
width as narrow as 8mm can be made. Nominal
thickness 3.2mm. With either integral/welded pass
partition bars with ample bolting.
| Type |
Construction |
Use |
Suitability |
| Type 123 |
Both contact surface covered |
Heat exchanger gaskets, boiler gasket, |
High pressure/high temperature gasket usage
up to class 900 |
| Type 126 |
Metal jacket made of corrugated jacket as
corrugation forms multi-seals across flange
sealing face |
Better resilience than Type 123 |
- |
| Type 127 |
Double shell gasket with two reversed
wrap-round shells |
Ease of handle,resistance to pressure |
- |
French Type Gaskets, Filler material enclosed in metal
jacket covering inside diameter of gasket & sealing
face on both sides.
| Type |
Construction |
Use |
Suitability |
| Type 130, 131, 132 |
Gasket width [6.4mm(min)] & nominal gasket
thickness[3.2mm] |
Vacuum seals, valve bonnet seals of low
pressures |
Small & large dia. in narrow & wide flange
widths in circular & non-circular
configurations
|
Solid Corrugated Metal Gaskets, Absence of non
metallic filler with corrugations providing
multi-seals across face of the gasket. Minimum 3
corrugations and gasket thickness as that of
corrugation pitch which can be 3.2mm, 4.8mm, 6.4mm.
| Type |
Construction |
Use |
Suitability |
| Type 100, 102, 129. |
Also made in soft conformable facings such
as graphite, PTFE etc |
Type 100 - Up to 500psi only. Type 102, 129
– Up to 1000psi. |
High temperature gasket applications and
applications using steam, water, gas, oil
etc |